PLA MATT is an easy to print variant on the everyday material PLA, with an aesthetical matt effect. Its surface diffuses light to give it a matt look, and creates a rough feeling. This material can be printed on most common printers and has a reliable bed adhesion to most common build plate materials.
“Birdhouse 16eme” Designed by FLOWALISTIK
PLA MATT features:
- Matt effect, low light refraction
- Easy to print rough surface
- Reliable bed adhesion
- Improved printing speed compared to PLA
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,38 g/cc |
| MFR 210°C/2,16 kg | ISO 1133 | 14 gr/10 min |
| Tensile strength at yield (MPa) | ISO 527 | 46,6 Mpa |
| Strain at yield | ISO 527 | 2,1% |
| E-modulus | ISO 527 | 3973 Mpa |
| Description | Testmethod | Typical value |
|---|---|---|
| printing temp. | DF | 215±10˚C |
Colours:
PLA MATT is available from stock in the following colours.
For non stock colours a minimum of 40kg ± 10% is required.
Packaging:
PLA MATT is available in nearly any type of packaging and labelling. Ask our team to help you customizing your product.
Additional info:
Due to its low tendency to warp PLA MATT can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60˚C. PLA MATT can be used on all common desktop FDM or FFF technology 3D printers.
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Comments are closed.