Sep 08


 GLASSBEND is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.

GLASSBEND features:

  • 92% light transmission, so very bright
  • Strong and flexible
  • Very good interlayer adhesion
  • No crazing when bent
  • Food Contact Acceptable
  • Almost no ”warping”
Sizeø toleranceRoundness
1,75mmø 0,05mm95%
2,85mmø 0,10mm95%
DescriptionTestmethodTypical value
Specific gravityISO 11831,01 g/cc
MFR 200˚C/5kg ISO 11337,5 g/10 min
Tensile strength at breakISO 52726 Mpa
Strain at breakISO 527230%
Flexural modulusISO 1781795 Mpa
Instr. Dart Impact
(23˚C, 3,18mm TE)
ASTM 376340,0 J
Shore HardnessISO 86863 D
Light TransmissionASTM D100392%
DescriptionTestmethodTypical value
printing temp.DF260±10˚C
melting temp.ISO 294205±30˚C
vicat softening temp.ASTM D152585˚C


GLASSBEND is available from stock in clear.
For non stock colours a minimum of  40kg ± 10% is required.



GLASSBEND is available in nearly any type of  packaging and labelling. Ask our team to help you customizing your product.

Additional info:

Recommended temperature for heated bed is ± 70-90˚C. Adhesion is possible on different surfaces.
GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.


Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.