ARNITE®ID3040
Nov 19

ARNITE®ID3040

ARNITE® ID3040 for Fused Filament Fabrication (FFF) applications combines high heat resistance, dimensional stability and outstanding strength with excellent processing characteristics. It’s one of very few pure PET filaments on the market today, and used to create everything from white goods connectors to automotive sensors.

ARNITE® ID3040 features:

  • Is an open source polyethylene terephthalate (PET) filament
  • Has a higher melting point and lower moisture intake than traditional PETG filaments
  • enabling you to create more accurate 3D-printed parts at higher temperatures with low warpage and better strength and mechanical properties
  • Good fusion & interlayer strength with great surface qualities
  • Parts can be coated or painted easily, and can withstand weathering and moisture well
Sizeø toleranceRoundness
1,75mmø 0,05mm95%
2,85mmø 0,10mm95%
DescriptionTestmethodTypical value
Tensile modulus (3D printed tensile bars) 45°-45°ISO 527-1/-22000 MPa
Maximum tensile stress (3D printed tensile bars) 45°-45°ISO 527-1/-247 MPa
Elongation at break (3D printed tensile bars) 45°-45°ISO 527-1/-224%
Water absorptionSim. to ISO 620.9 %
Humidity absorptionSim. to ISO 620.5 %
DensityISO 11831340 kg/m³
Flexural modulusISO 1782450 MPa
Flexural strengthISO 17880 MPa
DescriptionTestmethodTypical value
Printing temp.280±10°C
Melting temperature (10°C/min)ISO 11357-1/-3255°C

Colours:

ARNITE®ID3040 is available from stock in:

bk1
gyb

Packaging:

ARNITE®ID3040@DSM is available in your own packaging with co-branding from DSM.

Additional info:

Common fused filament fabrication (FFF) equipment should work with Arnite® filaments, direct drive as well as Bowden type extruders. Typical settings for any slicing software (e.g. Slic3R, Cura, Simplify3D) are listed below. Note that for different nozzle diameters the settings should be changed accordingly.


Storage:

In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged. For the same reason, partially used bags should be sealed before re-storage. Allow the material that has been stored elsewhere to adapt to the temperature in the processing room while keeping the bag closed.